GAUGE INSPECTION REPORT FOR 1 IN 12 BG 52 KG (DRG. NO. - RDSO/T-4734/1) CMS CROSSING AS PER GAUGE DRG. NO. - RDSO/T-4902 ALT-3

Sl. No.	Description of Gauge	Set - 01	Set - 02
1	(a) Bottom width gauge at sleeper location.
	(b) Bottom width gauge at sleeper location.
	(c) Bottom width gauge at sleeper location.
	(d) Bottom width gauge at sleeper location.
2	Flange way clearance
3	Flange way clearance at throat.
4	Flange way clearance (41 mm)
5	Nose Depression
6	Nose thickness
7	End Slope
8	Wheel tread gauge (of toe end)
9	Top edge contour gauge of wing (from inside)
10	Top edge contour gauge at 300 mm from nose of Xing.
11	Top edge contour gauge (at heel end)
12	Top edge contour gauge (for Vee portion)
13	Wing rail gauge (outside)
14	Wing rail gauge (at Nose)
15	Fishing plane cum bolt hole position gauge.
16	Flange recess gauge (at sleeper location)
17	Flange thickness gauge for heel & toe end sleeper location
18	Flange thickness gauge at sleeper location other than       heel & toe end
19	Plough share gauge (for toe end)
20	Heel end offset gauge at tangent point
21	Tie / Rib gauge
22	Flange thickness gauge other than sleeper location
23	Height gauge at throat and at location with 1 in 20 inclination top having 72 mm head width.
24	Height gauge for location without 1 in 20 inclination
25	Throat gauge inside
26	First sword gauge
27	Second sword gauge
28	Fish bolt hole gauge
29	Sloping gauge width of gauge = 10 mm
30	Gauge for checking fish hole with reference to machine bottom surface
31	Double ended calliper gauge
32	Double ended calliper gauge
33	AC/DC bond hole gauge
34	Flange well depth at Toe End
35	Sleeper spacing
36	Straight edge gauge
37	For Section of 100 mm from ANC towards heel gauge.

• Tweet
• Share
• Share
• Share
• Share

Related Post