ADVANTAGES and DISADVANTAGES OF COLD WORKING

 ADVANTAGES OF COLD  WORKING 


1. In cold working processes, smooth surface finish can be easily produced. 

2. Accurate dimensions of parts can be maintained.   

3. Strength and hardness of the metal are increased but ductility decreased. 

4. Since the working is done in cold state, no oxide would form on the surface and consequently good surface finish is obtained. 

5. Cold working increases the strength and hardness of the material due to the strain hardening which would be beneficial in some situations. 

6. There is no possibility of decarburization of the surface 

7. Better dimensional accuracy is achieved. 

8. It is far easier to handle cold parts and it is also economical for smaller sizes. 

DISADVANTAGES OF COLD  WORKING 

1. Some materials,  which are brittle,  cannot be cold worked easily. 


2. Since the material has higher yield strength at lower temperatures, the amount of deformation that can be given to is limited by the capability of the presses or hammers used.

 3. A distortion of the grain structure is created.

 4. Since the material gets strain hardened, the maximum amount of deformation that can be given is limited.  Any further deformation can be given after annealing. 

5. Internal stresses are set up which remain in the metal unless they are removed by proper heat-treatment.

Leave a Comment