10125mm/ 60kg Bearing plates

1.      Product: - Special Flat Bearing Plate Drg. No. RT-4597

Sl. No.	Details of Check	By Gauge/ Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	640 + 1	OK	OK	OK	OK
2	Width	Gauge	180 ± 1	OK	OK	OK	OK
3	Thickness	Tape	20	20	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	554 + 0.8, 100 + 0.8/25 + 0.8/ (160, 160)	OK	OK	OK	OK
6	Depth of machining	Gauge	6	OK	OK	OK	OK
7	Machining Length	Tape	280	280	280	280	280

 

2.      Product: - Special Flat Bearing Plate Drg. No. RT-4598

Sl. No.	Details of Check	By Gauge/ Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	790 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	707 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 354.5, 349)	OK	OK
6	Depth of machining	Gauge	6	OK	OK
7	Machining Length	Tape	280	280	280

 

3.      Product: - Special Flat Bearing Plate Drg. No. RT-4599

Sl. No.	Details of Check	By Gauge/ Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	790 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	707 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 354.5, 349)	OK	OK
6	Depth of machining	Gauge	5	OK	OK
7	Machining Length	Tape	280	280	280

 

4.      Product: - Special Flat Bearing Plate Drg. No. RT-4600

Sl. No.	Details of Check	By Gauge/ Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	790 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	707 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 354.5, 349)	OK	OK
6	Depth of machining	Gauge	4	OK	OK
7	Machining Length	Tape	280	280	280

5.      Product: - Special Flat Bearing Plate Drg. No. RT-8314

Sl. No.	Details of Check	By Gauge/ Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	845 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	762 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 407, 401)	OK	OK
6	Depth of machining	Gauge	3	OK	OK
7	Machining Length	Tape	280	280	280

 

6.      Product: - Special Flat Bearing Plate Drg. No. RT-8315

Sl. No.	Details of Check	By Gauge/ Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	845 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	762 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 425.5, 419.5)	OK	OK
6	Depth of machining	Gauge	2	OK	OK
7	Machining Length	Tape	280	280	280

 

7.      Product: - Special Flat Bearing Plate Drg. No. RT-8316

Sl. No.	Details of Check	By Gauge/Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	845 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	762 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 445, 438.5)	OK	OK
6	Depth of machining	Gauge	1	OK	OK
7	Machining Length	Tape	280	280	280

 

8.      Product: - Special Flat Bearing Plate Drg. No. RT-4604

Sl. No.	Details of Check	By Gauge/Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	790 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	707 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 345.5, 349)	OK	OK
6	Depth of machining	Gauge	6	OK	OK
7	Machining Length	Tape	280	280	280

 

9.      Product: - Special Flat Bearing Plate Drg. No. RT-4605

Sl. No.	Details of Check	By Gauge/Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	790 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	707 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 371, 365.5)	OK	OK
6	Depth of machining	Gauge	5	OK	OK
7	Machining Length	Tape	280	280	280

10.  Product: - Special Flat Bearing Plate Drg. No. RT-4606

Sl. No.	Details of Check	By Gauge/Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	790 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	707 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 388.5, 383)	OK	OK
6	Depth of machining	Gauge	4	OK	OK
7	Machining Length	Tape	280	280	280

11.  Product: - Special Flat Bearing Plate Drg. No. RT-4607

Sl. No.	Details of Check	By Gauge/Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	790 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	762 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 407, 401)	OK	OK
6	Depth of machining	Gauge	3	OK	OK
7	Machining Length	Tape	280	280	280

 

12.  Product: - Special Flat Bearing Plate Drg. No. RT-4608

Sl. No.	Details of Check	By Gauge/Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	845 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	762 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 425.5, 419.5)	OK	OK
6	Depth of machining	Gauge	2	OK	OK
7	Machining Length	Tape	280	280	280

13.  Product: - Special Flat Bearing Plate Drg. No. RT-4609

Sl. No.	Details of Check	By Gauge/Tape	Drawing Dimension (mm)	Observation
1	Overall Length	Gauge	845 + 1	OK	OK
2	Width	Gauge	180 ± 1	OK	OK
3	Thickness	Tape	20	20	20
4	Hole Dia. (4 Nos.)	Gauge	27 ± 0.8	OK	OK
5	Spacing of 4 holes/Steel shoulder dia. for E.R.C on bearing plate/Position of the 1 No. steel shoulder on bearing plate	Gauge	762 + 0.8, 100 + 0.8/25 + 0.8/ (148.5, 151.5, 445, 338.5)	OK	OK
6	Depth of machining	Gauge	1	OK	OK
7	Machining Length	Tape	280	280	280

• Tweet
• Share
• Share
• Share
• Share

Related Post